Operation Manual

27 PRIMETECH ENGINEERING
27/43
5.3. Camera connection
1. Connect the network port on the computer side and the camera network port.
2. Start the computer and turn on the camera.
3. Copy the "SphinxGEVViewerPTE_V *** _ ** _ **********" folder in the attached CD to your computer's local drive.
4. Launch Sphinx GEV Viewer
SphinxGEVViewer_x64.exe file is in the "SphinxGEVViewerPTE_V *** _ ** _ **********" → "Win64_x64" folder. When
starting for the first time, Right-click the SphinxGEVViewer_x64.exe file and click “Run as administrator”.
From the second time onward, you can start it by simply running SphinxGEVViewer_x64.exe.
Screen when the application starts
5. With the green LED on the LAN connector lit, press the "Quick Grab" button. The camera will be in the Open / Grab
state and the image will be displayed.
There are the following two frame rates displayed.
Disp: Drawing frame rate on PC (varies depending on PC specifications)
Transfer: Frame rate of data received from Ethernet (frame rate as a camera)