Operation Manual

29 PRIMETECH ENGINEERING
29/43
Ext1. When the trigger mode is on, click the “Options” button and check the “Ignore Image Timeout”.
(If unchecked, a timeout error may occur.)
Options Error Message
Ext2. Depending on the environment, it may take time to assign an IP address and search for a camera.
It may be shortened by fixing the IP setting of the camera / network card.
Camera side IP address setting example
After entering the set value, please press the Set button.
Press the Close button to disconnect from the camera and then turn the camera power on again.
The camera IP address is set to 169.254.100.100 at the shipment.