Operation Manual

34 PRIMETECH ENGINEERING
34/43
6.4. Defect pixel correction setting
Use the dedicated software SphinxGEV_DPCTool to add / reduce defective pixels.
Execute SphinxGEV_DPCTool_x64.exe in the "SphinxGEVViewerPTE_V *** _ ** _ **********"-> "Win64_x64" folder copied
from the attached CD. At the first startup, right-click and select "Run as administrator" to start.
1．Screen when the application starts
2．Correction setting item
① Enable DPC: Check to enable the correction function.
② Detect Setting
Offset: Sets the X / Y position of start detecting defective pixels.
Size: Set the width / height of detecting defective pixels.
FrameCount: Sets the number of images used to detect defective pixels.
③ Detect
White
Theshold: Set the detection threshold of white spots.
Detect: Detect the pixels over the threshold as white defects.
Clear: Clear the detected white defects date.
Black
Theshold: Set the detection threshold of black spots.
Detect: Detect the pixels under the threshold as black defects.
Clear: Clear the detected black defects date.
Clear All: Clear the detected white & black defects date.
Load Data : Press the “File-> App” button to load the detected data file.
Press the SPI Flash-> App button to read the detection data from the in-camera ROM.
④ Log Clear: Clear the displayed log.
⑤ Save Folder
Select: Select the folder where to save the file.
Open: Open the selected folder.