Operation Manual

PRIMETECH ENGINEERING

7/43

1. Overview

This operation manual describes functions and procedures for the GigE Vision interface SWIR1.3M/0.3M (B/W) CMOS

Camera (B/W).

1.1. Characteristics

•Interface

Compliant with the GigE Vision interface. Supports DC12V input using the attached AC adapter.

•Resolution

The number of effective pixels of the camera module is 1280(H) x 1024(V) for PXG130SP/PXG130S,

640(H) x 512(V) for PXG030SP/PXG030S.

•Diverse mode setting

The following modes can be set by sending commands from the host device.

・Image acquisition mode (Continuous / Multi Frame)

・Shutter function: Normal/triggered shutter

・Output bit length switching

・Read mode: Normal / Vertical decimation / Horizontal decimation / Image cropping (ROI)

・Frame rate control

・Exposure Time control

・Gain control

・Black level control

・Gamma correction

・User set control

・Image reverse function (H/V)

・Binarization function

・Cross line display

・Test pattern display

・Sensor temperature display / control function (Temperature control is PXG130SP / PXG030SP only)

・Defect pixel correction

・Edge enhancement

・Black and white inversion