Operation Manual

8 PRIMETECH ENGINEERING
8/43
・Triggered shutter
By using the external trigger, one still image can be obtained. Accurately capture objects moving at high speed.
・Output bit length switching
8 bit (MONO8) / 10 bit (MONO10) /12 bit (MONO12) output can be selected.
・Decimation function
The decimation of 1/2 horizontal and 1/2 vertical can be selected.
・Image cropping function (ROI)
Image cropping is possible in one area, 8 pixel steps (H/V).
・Frame rate
The frame rate can be set arbitrarily.
・Electronic shutter
The exposure time can be set arbitrarily.
・Gain
The analog gain can be set arbitrarily.
・Black level
The black level can be set arbitrarily.
・Gamma Correction
OFF (γ=1.0) / ON (the γ can be arbitrarily set by the user) can be switched.
・User set control
Camera settings can be saved and recalled.
・Image reverse
The image can be flipped horizontally and vertically.
・Binarization
The binarized image can be get. The threshold is arbitrary.
・Camera module fixing
The screw holes for fixing the camera module are located on the lower surface. Fixing the camera module on the front
panel can minimize deviation of the optical axis.