Installation & Assembly
Assembly:
To attach foot to gate or extension, slide foot downwards, groove-side down, between the two centermost posts in
the panel. Press down rmly until the foot makes even contact with the oor. Repeat for 2nd foot.
PLEASE NOTE: FIT WILL BE VERY TIGHT ON THE 360° Congurable Gate with Door 36” (33238-G8) AND 360° Extension Kit 36”
(33239-E8). THIS IS EXPECTED.
ASSEMBLY
INSTRUCTIONS
Provisions:
Support Feet increase gate/extension support and stability but are not
guaranteed to prevent animals from jumping on gate/extension and
tipping it over.
Manufacturer’s Recommendations:
We recommend applying additional anti-chew bitters serum to your
gate on a regular basis especially if your pet is still a puppy. For care
and cleaning, simply wipe with a damp cloth.
INSTRUCTION MANUAL
Please read this instruction manual carefully before assembling or using this product, and keep for future reference.
Thank you for choosing Primetime Petz Support Feet for the 360˚ Congurable Gate Collection. For dogs that push
against gates, add these sturdy support feet to provide extra stability and prevent tipping. Made of solid pine with
rich walnut stain and smooth satin nish,
Features:
This product may be used with the following
products:
360° Congurable Gate with Door 24”
360° Congurable Gate with Door 30”
360° Congurable Gate with Door 36”
360° Extension Kit 24”
360° Extension Kit 30”
360° Extension Kit 36”
Attractive wood nish compliments 360° Congurable
Gate Collection
Parts/Specifications:
One pair of Support Feet (2 pieces); minimal assembly
required
Additional set of rubber pads in case damage occurs
during installation
Dimensions/Weight:
Item Dimensions: 12L x ¾W x 3 5/8H inches
Item Weight: 0.5 lbs.
Materials:
Foot: Wood
Pads: Rubber
SUPPORT FEET ITEM#: 33401