Installation & Assembly

B. PRE-INSTALLATION ADVICE

 a.WARNING–incorrectttingorpositioningofthiswallmountkitcanbedangerous

 b.WARNING–neverusewithoutwallxings

 c.WARNING–Thegateshouldbepositionedsothatitopensawayfromthestairs

 d.Gatemustbettedonastructurallysolidopening,freeofdirtandgrease

 e.Thepositionofthebarrierinrelationtothestairsmayhaveanadverseaffectonyourpetssafety

  i.Ifthegateisusedatthetopofthestairstopreventyourpetorchildfromfallingdownthestairs,itmustnot

  beplacedonanystairbelowtheleveltopstair.

  ii.Ifthesafetygateisusedatthebottomofthestairstopreventyourchildfromclimbingupthestairs,itmust

  beplacedontheloweststair.

 f.Thisproductsrequiresthepurchaseofappropriatexingaidssuitableforthesurfacetowhichthehingesandcatches

 aretobetted.

360⁰ Wall Mount Kit for Conﬁgurable Gate and Extension Collection

ASSEMBLY

INSTRUCTIONS

ITEM #: 44135-W6, 44132-W3, 44138-W8

Thankyouforchoosingthe360°WallMountKitforyourwallmountingneeds.Thisisthebestwaytosafelyand

securelyattachyourPrimetimePetzCongurableGateorExtensiontoawallorframe.

WallMountKitsarecompatiblewithanygateorextensionofequalheightinthe360°CongurableCollection.Please

readandfollowtheseinstructionscarefullyandkeepforfuturereference.

INTRODUCTION

WARNING:Notforuseasababy/toddlergate

WARNING:Thiswallmountkitisfordomesticuseonly

WARNING:Donotuseifanycomponentsaredamagedormissing

WARNING:Donotuseacrosswindows

WARNING:Stopusingifapetorchildiscapableofclimbingit

WARNING:Neverclimbovergate

WARNING:Neverallowchildrentoclimborswingonthegate

WARNING:Checkthegatettingsregularlytoensuretheyremainsecurelyxedandthatthegateremainsfullyoperational

WARNING:Thissafetygatewillnotnecessarilypreventallaccidents.Neverleavechildrenunattended.

CONTENTS AND PARTS LIST

A. CONTENTS

A X 4

BX16

C X 4

D X 4

E X 4

H X 1

KX2

FX2

GX2

I X 8

J X 8

PAGE 1
ASSEMBLY INSTRUCTIONS ITEM #: 44135-W6, 44132-W3, 44138-W8 360⁰ Wall Mount Kit for Configurable Gate and Extension Collection Thank you for choosing the 360° Wall Mount Kit for your wall mounting needs. This is the best way to safely and securely attach your Primetime Petz Configurable Gate or Extension to a wall or frame. Wall Mount Kits are compatible with any gate or extension of equal height in the 360° Configurable Collection.
PAGE 2
STEPS 1. Attach a wall post (K) to each of the outside panels using hinges (A) and screws (B) provided. PLEASE NOTE: the post is right side up when the holes are closest to the top. Screw a nut (D) onto each spindle (C). Place a square nut (E) into each slot at the top and bottom of the wall posts. Then, screw a spindle with nut into each square nut (E) I C E 2. Find your wall mount kit size in table below, mark the position of the top hole in the wall catches F & G on one of the wall surfaces.