Installation Manual

Fit everything. Together.

FOR MORE INFORMATION CONTACT:

1.604.881.7875

1.604.881.7835

www.primex.com

STEP 5

STEP 7

STEP 6

STEP 8

Finish installation

Remove paintshield, install locks (optional), and install telecom

components (modem, ONT, UPS, eg.).

Paint and affix lid

Place paintshield, paint drywall, and install frame extender

(optional) and lid and frame sub-assembly.

Measure, mark, cut and mount drywall

Use measurements from step 5 to mark out drywall. Cut out marked

area of drywall. Fit drywall over top of the installed enclosure base

and secure.

PRIMEX

MDE Installation Instructions

PRODUCT

MODEL CODE

Measure installation position

Measure distances from edges of enclosure to outside of adjacent

studs, floor and ceiling.

Verge MDE

P2100, P3000, P4200, P6300

452-3113