Installation Manual

Fit everything. Together.
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
F
1.604.881.7835
www.primex.com
Shelf Mounting System (SMS)
*All Installation Videos can be found on the Primex website.
Universal Mounting System (UMS)
Rail Mounting System (RMS)
PRIMEX
MDE Accessory Installation Instructions
PRODUCT
MODEL CODE
Pre-insert up to six pushpins into
UMP before placement.
Determine placement of RMP and
press pushpins to lock in place.
*Max mounted component
thickness of 3.3”
*Recommended load
5lbs (2.27kg)
Optional mounting tape to secure
hardware. (not included)
Determine placement location of
component, cut tape, and thread.
Place component and press
bracket arm to hold securely.
Recommended load 5lbs (2.27kg)
Place in heavier equipment first.
Mount shelf into place and
secure.
Insert push pins to affix SMS to the
Media Distribution Enclosure.
Can be installed side by side and
act as a service divider.
Snap the frame
pieces together.
Align extender and
MDE frame.
Affix frame and
extender together.
Determine placement of UMP and
depress pushpins to lock in place.
Slide brackets into place from the
side of the mounting plate.
Pull tape and affix to hold and
ensure component is secure.
1
1
1
3
4
3
3
2
2
4
2
4
Verge MDE
P2100, P3000, P4200, P6300
452-3113
P3000N Narrow Frame & Lid
Verge MDE Frame Extender
Place enclosures between studs
side-by-side.
Install frame and lid using the
provided No.8 screws.
(P/N: 125-1265)
1
1
32
2