User's Manual

Installation and User Guide Emergency Light Monitoring

Troubleshooting the Installation

If you have issues during installation, please refer to the following table:

Troubleshooting Issue Possible Resolution

Lamps on light fixture do not illuminate during test 1. Improper wiring

2. Bulb burned out

Cannot access the AMP server 1. Check network interface (wired/wireless)

LED on ELC does not illuminate 2. Check power to ELC

No test data/monitoring data on SNS AMP 1. Check network interface (wired/wireless)

2. Defective ELC

Light fixture provides less than 8 hours of

emergency lighting during test.

1. Improper charging of batteries

2. Faulty batteries