User Manual

Installation Requirements - Smart-Sync Digital Clock/Timer
Refer to the Important Safety Instructions before installing, operating or performing maintenance of clocks/timers.
Note:
Any damage to the clock or timer due to improper wiring voids the warranty.
Installation requirements
A Smart-Sync Bridge or Smart-Sync Clock/Timer is within 80 feet (24.3 m) from the clock installation location.
AC-powered digital clock/timer power specifications
Shipped from the factory with a 10 ft (3.0 m) two-prong grounded plug.
The two-prong plug may be removed for hardwired (pigtail) installation. Hardwired (pigtail) installation requires a 120V~ power
line in a 4 in. x 4 in. junction box installed by a licensed electrician. Leave a minimum of 6 in. of pigtail inside the junction box.
11
Smart-Sync Digital Clock/Timer Install Guide