Install Guide

DRAFT
Parameter Specification
User-defined
settings
(OneVue Sync
software)
Legacy Clock Time Zone, Alarm Delay, Firmware, Unresponsive Timeout, and Check-in Interval.
Front Panel Four LED status indicators (Power, Transmit, Caution, Error) and Bluetooth labeled push-button to pair
Transceiver with the Primex OneVue Device Configurator (ODC) app.
Rear Panel Network LAN port (RJ-45 Ethernet, 100/10 Mbps, 802.3 Ethernet), GPS In port (MiniDIN 7-Pin), External Antenna
connector (coaxial, n-male), Baseboard Monitor port (MiniDIN 9-Pin, for use with 5 or 30 Watt Transceiver only),
dry contact closure relay panel (for use with specified Primex products), and pin port to allow end-user
connection initiation (check-in) to the Primex OneVue cloud-based software.
Top Panel Internal Antenna connection.
Operating
Range
32° to 122° F (0° to 50° C), non-condensing environment
10