Install Guide

DRAFT
LED
Indicator
LED
Color
Operating State/Status
Transmit
Green Main Transceiver: Solid green indicates transmitting (broadcasting).
Repeater Transceiver: Solid green indicates transmitting (broadcasting) and flashing green indicates
receiving signal from configured Repeater Transmit channel.
Caution
Yellow
When illuminated, indicates in a warning/caution state, due to one or more of the status conditions below.
Error
Red When illuminated indicates in an alarm/error state, due to one or more of the status conditions below. When
power is first applied,
l Bad Output Power: Not transmitting at the appropriate power level.
l PLL Diagnostics: Cannot lock onto a channel; rendering it unable to broadcast time or schedules.
l VSWR Errors: Problem with either the High Power Antenna (may need repositioning) or the antenna
cabling.
l No GPS in 48 Hours: Has not connected to a time source for more than 48 hours.
l No 1PPS in 48 Hours: Time has not been synchronized by 1PPS (1 Pulse Per Second) for more than 48
hours.
l GPS Cable Break: Line break, water ingress, or cable length in excess of 200 ft.
2. If the Transceiver is connected to OneVue, verify its check-in to OneVue and in a Normal state.
18