Owners Manual

PCG.rev04282017- 10:53
2
G420H HEAD UNIT ONLY CUTOUT AND INSTALLATION
4-1/4” of open space behind grill
23-1/4”
27-1/2”
36 1/2”
36 1/2”
11”
4-1/4” of open space behind grill
23-1/4”
27-1/2”
36 1/2”
36 1/2”
11”
Top View
NOTE: 4-1/4” open space behind grill shroud is required for hinge clearance.
NOTE: 10" of clearance from back of hinge required to open lid.
NOTE: The control panel is designed to protrude past the front of the
countertop surface. (g. 1)
IMPORTANT: The G420H is a slide-in installation, not a hanging
installation. The base of the metal grill surround must be supported from the
bottom edges.
Front View
g. 1
* Note: If installing this grill in a combustible enclosure, the correct insulating liner must be used.
Consult liner instructions for counter cut-out dimensions and installation.