User's Manual Part 1

1. Install recommended batteries into speaker and remote with polarities as indicated in
Battery Compartments. Speaker requires 8 “AA” batteries. Remote requires 3 “AA”
batteries.
2. Turn on speaker by pushing POWER button. Red LED will illuminate.
3. Turn on remote by pushing POWER button. The color LCD screen will turn on and show
the Turbo Dogg Menu. Push SCROLL
▲ or ▼ to navigate through all Menu options.
4. Use SELECT and BACK buttons to navigate in and out of folders.
5. Position Speaker so signal strength on Remote has a minimum of 1 signal bar.
6. Your caller is ready to use!
7. To turn off caller, reverse above instructions.
BATTERY LEVEL INDICATOR
The constantly displays the battery level:
Full charge
Low battery
Please change the battery
REGISTER YOUR TURBO DOGG CALLER
1. It is very important to register your caller. This activates your warranty, allows you to download
latest software updates, allows you to download sounds and Expert
TM
Hunts, and keeps you
updated with latest information on your caller.
2. To register your caller visit www.Primos.com
and/or fill out and return enclosed registration card.
Note: You will need to include the serial number of the caller. It is located inside the battery
compartment.
PLAYING SOUNDS .
1. In Menu screen push SCROLL
▲ or ▼ to navigate through all Menu options and highlight
Sounds and push Select.
2. In Sounds screen push SCROLL
▲ or ▼ to navigate through all sound options and highlight
desired sound category and push SELECT.
Example: Select Predator Hunting. This enters you in a menu to select sound types for hunting
predators. Push SCROLL
▲ or ▼ to navigate through Predator Sound Types and highlight
desired predator category and push SELECT. This enters you into a list of sounds tracks