Instruction manual

STATUS INDICATION LIGHTS

RED LIGHT ***

(on front of camera)

Lights up when the camera detects motion. After you close

camera door and are standing in front of the camera, visibility of

this light is indication that your camera is ON and working.

TIP: Walk in front of the camera and look for the red light to illuminate when

you are detected. You can do this to verify your camera is pointing in the

correct direction.

**NEVER COVER THE RED LED LIGHT. This LED LIGHT also

doubles as the camera’s light sensor, which determines day or

night operation.

NOTE: This RED motion indicator LED will only illuminate for

approx. 10 minutes after the camera enters standy mode.

GREEN LIGHT

(next to PWR button inside camera)

Lights up when the camera is capturing and recording media on

the SD Memory Card. Also, the LCD screen will show ‘PIC’ during

this process.

NOTE: Do not remove SD Memory Card when the green light is

illuminated or blinking – this could cause you to lose all data on

memory card!

NOTE: The LCD menu will not wake up from Power Saving Mode

while the Green Status Light is illuminated/ LCD reads ‘PIC’.

Wait until after Green Light turns off and then press the POWER

BUTTON to wake up the LCD screen.

NUMBER OF FILES STORED ON SD CARD

The initial main LCD screen displays number of ﬁles ‘0000’ stored

on the SD Memory Card and the battery life. For example, ‘0015’

would indicate that any combination of ‘ﬁfteen’ photos, videos

and/or time lapse videos are stored in the memory.