Instruction manual

USB PORTS

At this time, the USB port offers the following functions (USB cable not included):

1. PC CAMERA – Power on camera and then plug USB cable from camera into the computer

2. USB DRIVER – With camera power OFF plug USB cable from camera into the computer, then

power the camera ON. In USB Driver mode you can review, copy and delete the media ﬁles/

data stored on the SD Memory Card in the camera.

NOTE: Keep rubber weather resistant cover/plug in place when the port is not in use to avoid damage.

EXTERNAL POWER PORTS

The Truth

Cam Ultra™ comes standard with an external power port. This is a DC JACK/2.0mm

and will accept 12V power sources.

NOTE: Keep rubber weather resistant cover/plug in place when the port is not in use to avoid damage

WARNING: DO NOT install internal batteries and connect an external rechargeable battery at the same

time. Failure to follow this warning may result in premature battery drain, leaking or

exploding batteries, damage to product, ﬁre or personal injury. Do not handle

damaged or leaking batteries. TRUTH

CAM Ultra

™

Battery Case

is designed for use with the 8 AA internal batteries and is

excluded from this warning.

Recommended:

Primos

TRUTH

CAM ULTRA

™

Battery Case

Allows you to add up to 16 “AA” Batteries to your

TRUTH

Cam Ultra