User's Manual

NOTE: Remote control buttons are designed to activate command when button is completely pressed down on the

remote.

TWITCH MOTION [Located in center of remote] – Produces short single tail twitch

motion. Motion gives approaching deer confidence to continue their approach. Note:

When signal is sent LED activates.

WAG MOTION [Located toward bottom of remote] – Produces single tail wagging motion.

Motion gives distant deer confidence all is well to move in closer. Note: When signal is

sent LED activates.

POWER BUTTON – Standard ON/OFF functionality

RED LED LIGHT IN BUTTON – Indicates power is on.

.ATTACHING WAGGIN’ WHITETAIL

TO DEER DECOY (DEER DECOY NOT INCLUDED).

NOTE: Primos does not recommend transporting Waggin’ Whitetail

attached to decoy in and out of field. Remove

Waggin’ Whitetail

and transport separately.

1. Using included decoy hole pattern, attach

4 screws to deer decoy so bolt head

stands off decoy approximately 3/8 inch.

2. Attach motor housing by aligning holes

with 4 bolts and sliding housing down so

housing is locked into slots. Note: May

need to adjust bolt height depending on

deer decoy design.

.ATTACHING WAGGIN’ WHITETAIL

TO TREE OR POST.

1. Thread strap thru 2 slots on decoy

housing.

2. Wrap strap around tree / post and

connect buckles together. Pull strap thru

buckle to secure to tree / post.

. WAGGIN’ WHITETAIL

PLACEMENT .

Place decoy within 40 yards of your location. Hunting Tip: Keeping decoy within 25 yards allows for closer shots.

IMPORTANT NOTE: If decoy is placed at long distances, on the ground, in thick cover, in under brush, or has

obstructions between remote and decoy always check remote function with decoy. If remote does not operate

decoy, decrease decoy distance.

. CARING FOR YOUR WAGGIN’ WHITETAIL

Your caller contains sensitive electronic components that can be permanently damaged if exposed to excessive

shock or vibration. To minimize the risk of damage to your unit, avoid dropping your unit and operating it in high-

shock and high-vibration environments.

- Do not store your unit where prolonged exposure to extreme temperatures can occur, because it can

cause permanent damage.

- Do not expose to prolonged exposure to moisture. This can cause this unit to malfunction.