Primus Wind Power AIR 40 User Manual
AIR Owner’s Manual 18
Marine Tower Kit
The Marine Tower Kit is specically designed to aid mounting
the turbine on a boat deck. Kit includes powdercoated alu-
minum mast and stays, vibration damping mounts and all necessary
marine grade hardware to install the kit. See Fig. 6.
3x
8x
45' AIR TOWER
16x
x2
Fig. 5. 45 ft (13.7 m) Tower Kit
45 ft (13.7 m) Tower Kit
The 45 ft (13.7 m) Tower Kit includes tower clamp/guy wire assemblies and all
necessary hardware and fasteners to erect a 45 ft tilt-up tower using Schedule
40 steel pipe or tubing with an outside diameter of 1.875 inch. See Fig. 5.
IMPORTANT: User manuals for towers and tower kits are available online
at www.primuswindpower.com. Primus Wind Power recommends reviewing
them to make an appropriate tower selection for your AIR wind turbine.
Fig. 6. Marine Tower Kit
Note: Anchors and pipe or tubing are not furnished.