AIR Owner's Manual

AIR 40, AIR Breeze, AIR 30, AIR X MARINE and AIR SILENT-X are trademarks of Primus Wind Power 2013 Primus Wind Power Inc. AIR Owner’s Manual 3-CMLT-2020-A 12
Blade to Hub Assembly (STEP 1)
3/16”
Assembled blade
WARNING: Nylock nuts and greased blade bolts may only be used
one me; replace aer each use.
NOTE: See Appendix B: AIR Silent X Blade Set and Further Installaon Recommendaons
Assembly blade set rst using proper torque for hardware and
applicaon of tef-gel included.
AIR 30 and AIR X Marine units, it is recommended to perform p to p
measurment of blades prior to properly securing hub to avoid vibraon.
The hub blade root allows for adjustment of the blade posion. There-
fore, it is recommended to adjust the distance between each blade p.
The blades should have a distance from blade p to blade p approxi-
mately equal between all three blades.
and AIR X Marine
IMPORTANT: Tef-Gel is a corrosion inhibitor and is especially
important in marine applicaons. Tef-Gel should be applied
to all blade bolts and yaw bolts using the applicator and Tef-
Gel provided with your hardware kit. Tef-Gel helps to pre-
vent corrosion and lubricates threads (recommended for both
land and marine usage).