AIR Owner's Manual

AIR 40, AIR Breeze, AIR 30, AIR X MARINE and AIR SILENT-X are trademarks of Primus Wind Power 2013 Primus Wind Power Inc. AIR Owner’s Manual 3-CMLT-2020-A 18
ROOF MOUNT KIT
The Roof Mount Kit allows the pole for your AIR wind turbine to be mounted
to the wall or roof truss of a structure and extend above its rooine. The kit
includes isolators, base plates and all hardware, clamps and straps.
Your AIR can be mounted ush to the side of the structure or via a penetrang
hole through the roof or eaves. If mounted via penetrang hole, we recom-
mend purchasing the roof mount kit with seal. See Fig. 7.
Fig. 7. Roof Mounng Kit
TOWER LEVELING
When installing a tower it is important that both the tower and
turbine are properly level. If not properly leveled this can aect
both performance and power output.
In addion to power output being aected there is the potenal
the blades could rotate in the opposite direcon loosening the
rotor nut creang a safety concern.
NOTE: if the turbine is not level the turbine will always
sele in the o-level posion, causing reduced power
and performance.
TIP: Installing wind turbine using roof mount kit tower
or on a building can aect performance due to in-
creased turbulence.