29' EZ Tower Kit Manual

8 EZ Tower

Owner’s Manual, Rev A

EZ Tower Parts:

Description Quantity

Tower Base 1

21 ft (6.4 m) Guy Wire Set (wire guy wire attachment plate) 1

30 ft (9.1 m) Guy Wire Set (wire guy wire attachment plate) 1

M10 x 65 mm Bolt 1

M10 Locknut 1

Cable Thimbles 8

Cable Clamps 16

Tower Base Earth Spikes 4

Arrowhead Earth Anchors 4

Earth Anchor Driving Rod 1

1- 7/8 in x 72 in (4.76 cm x 1.8 m) Tower Tubes 4

1- 7/8 in x 48 in (4.76 cm x 1.2 m) Tower Tubes 1

1- 7/8 in x 42 in (4.76 cm x 1.0 m) Tower Tubes 1

EZ TOWER PARTS & REQUIRED TOOLS

IMPORTANT: If any parts are missing from the list

shown above, call Primus Wind Power.

EZ Tower Required Tools:

Description Quantity

100 ft (30.5 m) Measuring Tape 1

5/16 in (.8 cm) Wrench, Socket or Nut Driver (preferred) 1 or 2

9/16 in (1.4 cm) Wrench or Socket 2

10 kg Hammer 1

Mallet 1

Pliers 1

Carpenters Level 1

Safety Glasses 1 pair/person

Protective Gloves 1 pair/person

IMPORTANT: Before you begin installation of your EZ

Tower be sure to have all parts and required tools.