Air 30 12v Installation

29 ft (8.8 m) EZ – Tower

The 29 ft (8.8 m) EZ Tower is a complete kit that includes all materials

required to assemble a 29 ft guy wire tilt-up tower. Anchors, guy wire

assemblies, galvanized steel tubing and all fasteners. See Fig. 4.

17 AIR Owner’s Manual

Fig. 3. 27 ft (8.3 m) Tower Kit

27' AIR TOWER

27 ft (8.3 m) Tower Kit

The 27 ft (8.3 m) Tower Kit includes a tower clamp/guy wire assembly

and all necessary hardware and fasteners to erect a 27 ft tilt-up tower

using Schedule 40 steel pipe or tubing with an outside diameter of

1.875 inch. See Fig. 3.

Note: Anchors and tubing are not furnished with the kit.

1. The AIR wind turbine mounts on tubing with a nominal 1.875 – 1.900

inch outside diameter.

2. Typical tower construction use: 1 1/2 inch Schedule 40 steel pipe or 2

inch SS-20 galvanized fence tubing (0.090 inch wall thickness).

3. DO NOT use plastic pipe to construct a tower.

AIR Wind Turbine Towers

Tower Options

Primus Wind Power offers a number of tower choices for your AIR wind

turbine. The following section provides a summary of the available tower

kits. User manuals for the towers and tower kits are available online and you

are encouraged to review them in order to make the most informed tower

selection.

IMPORTANT: User manuals for towers and tower kits are

available online at www.primuswindpower.com. Primus

Wind Power recommends reviewing them to make an

appropriate tower selection for your AIR wind turbine.

Fig. 4. 29 ft (8.8 m) Tower Kit

29'EZ TOWER KIT

x16