Installation Guide

PRIMUS WIND POWER DOCUMENT #0070 REV C
PRIMUS WIND POWER Page 17 of 26
2/4/05
Method I (Gin Pole to Base, then Tower to Base)
This is the simplest method, but can be difficult if large wires (4 gauge or larger) are used.
1) Mount one end of the gin pole in the tower base and tighten the set-screw to hold it.
2) Mount the gin pole cap and install the bolt through its tabs. Snug the nut onto the bolt.
3) Attach the snap links and 8 foot cable as shown in the drawing.