User`s manual

516574_C_PUB_DATE_3_NOV_2009.DOC INSTALLATION AND MAINTENANCE MANUAL 19
8. PUTTING THE MACHINE OUT OF SERVICE
8.1. DISCONNECTING THE MACHINE
1. Disconnect the outer electric power supply from the machine.
2. Turn off the outer water inlet.
3. Make sure, the inlets of power supply and water are closed. Disconnect all power and water inlets.
4. Insulate the outer power supply cables.
5. Mark the machine by „OUT OF SERVICE“.
6. During transportation follow the instructions stated in chapters:
„2.1. DURING TRANSPORTATION AND STORAGE“, „4.1. MANIPULATION AND UNPACKING“.
In case the machine will never be used again, secure it so that injury of persons, damage to health, property,
and nature is avoided. Make sure enclosing of persons or animals inside the machine cannot occur, injury
of persons by moving or sharp parts of the machine, possibly operating fills, (e.g. remove the door, secure
the drum against turning, … and similar.)
BE CAREFUL, FALLING DOOR AND GLASS CAN CAUSE INJURIES!
8.2. MACHINE DISPOSAL
WARNING!
TAKE ALL NECESSARY ACTION AND PRECAUTIONS WHEN DOING DISASSEMBLY OF THE WASHER
TO AVOID INJURIES BY GLASS OR SHARP METAL EDGES.
8.2.1. POSSIBILITY OF THE MACHINE LIQUIDATION BY THE SPECIALIZED COMPANY
Information concerning the WEEE-directive (Waste Electrical and Electronic Equipment, for European
Union member states only):
– For the production of the machine that you have purchased, natural resources are being reclaimed and used.
The machine can contain substances which are dangerous for health and environment.
– When you dispose of your machine, to avoid spreading of these substances in our environment and to reduce
the pressure on our natural resources, we encourage you to use the collection, reuse and recycle system
of your region or country. These systems reuse or recycle most of the components.
– The symbol „crossed out bin on wheels ( )“ invites you to make use of these systems.
– If you wish more information concerning the systems for collection, reuse or recycling of disposed machines,
you can take contact with the competent administration of your region or country (waste management).
– You can also take contact with us for more information concerning the environmental performances of our products.
– Please, consider that the WEEE directive is generally only valid for household machines. In some countries
professional machines are added, in others not. Therefore the symbol ( ) may not be present.
– Info for dealers: Due to the diversity of the national legislations, manufacturer can not take all the measures
to be in accordance with all national legislations of each member state. We expect that each dealer who imports
our appliances into a member state (and puts it on the market) takes the necessary steps to be in rule
with the national legislation (as the directive requires).
8.2.2. POSSIBILITY OF THE MACHINE LIQUIDATION BY OWN POTENTIAL
It is necessary to sort out the parts for metal, non-metal, glass, plastics etc, and bring them to recycle places.
The sorted out materials has to be classified in waste groups. These groups can be found on www.euwas.org
Offer the sorted waste to the company which is competent for further treatment.
!