Specifications

516307 C PUBLICATION DATE 31 JAN 2008.DOC PROGRAMMING MANUAL 15
Individual Price :
rt1 : Reference Time corresponding with coin value 1 for Program 1
rt2 : Reference Time corresponding with coin value 1 for Program 2
rt3 : Reference Time corresponding with coin value 1 for Program 3
The time can be set between 0 – 30 Min.
Defaults : rt1 = 2 Min
rt2 = 2 Min
rt3 = 2 Min
Reference Time smallest coin value for selection
SPECIAL PRICES [coin 1]
ONLY VALID WHEN SP = ON in t-menu
Same as for rt1, 2, 3, in case of selection SPECIAL PRICES you can also set Reference Times
corresponding with coin value 1.
At the moment when the function SPECIAL PRICES is switched on, the values St1, 2, 3 become
valid instead of the values for rt1, 2, 3.
One Price :
St : Reference Time corresponding with coin value 1
Defaults : St = 6 Min
Individual Price :
St1 : Reference Time corresponding with coin value 1 for Program 1
St2 : Reference Time corresponding with coin value 1 for Program 2
St3 : Reference Time corresponding with coin value 1 for Program 3
The time can be set between 0 – 30 Min.
Defaults : St1 = 6 Min
St2 = 6 Min
St3 = 6 Min
Cooldown Time
At the end of the drying process the dryer must execute a cooldown sequence to reduce the
temperature in the dryer.
In case of selection „Pri“ = „one“ there can only be set 1 cooldown time.
In case of selection „Pri“ = „Ind“ there can be set 3 cooldown times.
One Price :
ct : Cooldown Time
Defaults : ct = 5 Min