Specifications

22 PROGRAMMING MANUAL 516307 C PUBLICATION DATE 31 JAN 2008.DOC
„S“- SYSTEM MENU
The System Menu defines the way that the dryer functions by selecting the right machine type and by
loading it‘s corresponding factory settings.
WARNING !
IF YOU LOAD THE STANDARD FACTORY SETTINGS THEN ALL THE SETTINGS MADE BY THE
CUSTOMER WILL BE LOST.
MACHINE TYPE
- First you have to select the right machine type.
- The right machine type can be found on the machine type plate at the rear panel of the dryer
machine.
Available Types :
• T9
• T11
• T13
• T13/13
• TAMS13
• T16
• T24
• T35
Default: T9
REMARK:
Select machine type T13 for machines T13/13 (double dryer) and TAMS13.
LOAD FACTORY SETTINGS
- Load factory settings when a new dryer control unit is installed or when a complete reset is
required.
- Factory Settings are loaded by changing the „FAC“ setting to „on“
ATTENTION !!!
ALSO THE SETTINGS IN THE T- AND OTHER SUBMENU‘S WILL BE SWITCHED BACK TO THE
STANDARD FACTORY SETTINGS.
ATTENTION!!!
WHEN A NOT COMPATIBLE SOFTWARE VERSION IS INSTALLED, ERROR MESSAGE 35 WILL BE
GENERATED BY THE COMPUTER.