Operation Manual

15
EN
Close the cover (26) until the release 
button (25) clicks into place.
Insert the dust compartment (6) into the 
appliance until the release button (7) clicks
into place.
Cleaning and replacing the
HEPA filter (fig. B, I & J)
The appliance is equipped with a HEPA filter.
The HEPA filter is a special air filter which
removes more than 99% of the dust particles
that otherwise would recirculate back into the
air. The HEPA filter must be cleaned regularly.
The HEPA filter must be replaced after several
months or whenever worn or damaged.
Replacement HEPA filters are available from
our service station.
Caution!
- Do not wash or rinse the HEPA filter.
- Do not tap the HEPA filter itself to avoid
damage to the filter.
Keep the release button (7) pressed and 
pull the dust compartment (6) from the
appliance.
Remove the HEPA filter (28) from the filter 
holder (30).
Carefully tap the plastic edge of the HEPA 
filter (28) to remove the dust particles.
If the filter is worn, use a new filter.
Insert the HEPA filter (28) into the filter 
holder (30).
Insert the dust compartment (6) into the 
appliance until the release button (7) clicks
into place.
Cleaning and replacing the
motor filter (fig. B & I)
The motor filter reduces the amount of dust
entering the motor unit to a minimum. The motor
filter must be cleaned regularly. The motor
filter must be replaced whenever damaged.
Replacement motor filters are available from
our service station.
Caution!
- Do not wash or rinse the motor filter.
Keep the release button (7) pressed and 
pull the dust compartment (6) from the
appliance.
Remove the HEPA filter (28) from the filter 
holder (30).
Remove the motor filter (29) from the filter 
holder (30).
Remove the dust from the motor filter (29) 
using a soft brush. If the filter is damaged,
use a new filter.
Insert the motor filter (29) into the filter 
holder (30).
Insert the HEPA filter (28) into the filter 
holder (30).
Insert the dust compartment (6) into the 
appliance until the release button (7) clicks
into place.
Cleaning and replacing the
outlet filter (fig. K)
The outlet filter reduces the amount of dust
entering the motor unit to a minimum. The outlet
filter must be cleaned regularly. The outlet
filter must be replaced after several months or
whenever worn or damaged. Replacement outlet
filters are available from our service station.
Caution!
- Do not wash or rinse the outlet filter.
Keep the release button (31) pressed and 
remove the cover (32).
Remove the outlet filter (33) from the filter 
holder (34).
Remove the dust from the outlet filter (33) 
using a soft brush. If the filter is worn, use
a new filter.
Insert the outlet filter (33) into the filter 
holder (34).
Mount the cover (32) until the release button 
(31) clicks into place.
Disclaimer
Subject to change; specifications can be
changed without further notice.