manual

7
Royal Crepe Maker Article 492227
• Make sure the power cord and the
plug do not come into contact with
water.
• To avoid the risk of fire, the appliance
must be able to release the heat that it
produces. Make sure the appliance
has sufficient space around it and
does not come into contact with
inflammable materials. The appliance
must not be covered.
During use
• Never use the appliance outdoors.
• Never use the appliance in a humid
room.
• Place the appliance on a stable, flat
surface where it cannot fall over.
• Do not allow the power cord to hang
over the edge of a sink, a work surface
or a table.
• Make sure your hands are dry before
you touch the appliance, the power
cord or the plug.
• Remove the plug from the plug socket
in the event of a malfunction during
use, before cleaning the appliance,
before fitting or removing an
accessory and before storing the
appliance after use.
• Never leave the appliance unattended
when in use.
• Keep the appliance out of the reach of
small children.
• Never move the appliance whilst it is
turned on or is still hot. Turn off the
appliance and wait until it has cooled
down before moving it.
• Do not use sharp implements on the
hotplate, such as metal spatulas,
knives and forks. These may damage
the non-stick coating.
• Never immerse the appliance, the
power cord or the plug in water or
other liquids.
• This appliance’s hotplate has a non-
stick PTFE coating. On heating this
coating, it may release small amounts
of gases which are totally harmless to
humans. However, the nervous
system of birds has been found to be
extremely sensitive to these gases
and for this reason, this appliance
should not be used near birds (for
example, tropical birds such as
parrots).
• Do not touch the appliance if it has
fallen into water. Remove the plug
from the plug socket immediately. Do
not use the appliance again.
• Clean the appliance thoroughly after
use (see ‘Maintenance and cleaning’).
Allow the appliance to cool down
before you store it, clean it or carry
out maintenance work.
U.K. WIRING INSTRUCTIONS
The wires in the mains lead are
coloured in accordance with the
following code:
• BLUE NEUTRAL
• BROWN LIVE
• GREEN/YELLOW EARTH
As the colours of the wire in the mains
lead of this appliance may not
correspond with the colour markings
identifying the terminals on your plug,
proceed as follows:
• The wire which is coloured BLUE
must be connected to the terminal
which is marked with the letter N or
coloured black.
• The wire which is coloured BROWN
must be connected to the terminal
which is marked with the letter L or
coloured red.
• The wire which is coloured GREEN/
YELLOW must be connected to the
terminal which is marked with the
letter E or (earth symbol) and is
coloured GREEN or GREEN/YELLOW