manual

5
Royal Crepe Maker Article 492227
General information
This attractive Royal Crepe Maker is
suitable for baking delicious crepes. The
appliance is easy to use and keep clean.
The handy batter distributor allows you to
make lovely, thin crepes.
Operation and
controls
See figure 1.
The appliance consists of the following:
1 Hotplate
2 Housing
3 Indicator light
4 Power cord and plug
5 Batter distributor
Before using for the first time
1 Remove all the packaging materials
and stickers from the appliance.
2 Clean the appliance and all the
accessories (see ‘Maintenance and
cleaning’).
3 Set up the appliance and turn it on (see
‘Turning the appliance on and off’).
4 Allow the appliance to become hot.
The appliance may emit a little smoke
and a characteristic smell when you
turn it on for the first time. This is
normal and will soon stop. Make sure
the appliance has sufficient ventilation.
5 Allow the appliance to cool down.
Turning the appliance on and
off
1 Place the appliance on a flat, sturdy
surface.
2 Insert the plug into the plug socket. The
indicator light will be lit and the
appliance will become hot. Once the
indicator light goes out, the hotplate is
at the correct temperature.
3 Remove the plug from the plug socket
once you have finished.
Baking crepes
Once the hotplate is at the correct
temperature and the batter has been
prepared (see ‘Cooking tips’), you can start
to bake the crepes.
Do not use sharp implements on the
hotplate, such as metal spatulas, knives
and forks. These may damage the non-
stick coating.
1 Apply a small quantity of oil or butter
onto the hotplate.
2 Use a spoon to pour a thin layer of
batter onto the hotplate.
3 Use the batter distributor to spread the
batter evenly over the hotplate.
4 Allow the batter to solidify.
5 Use a wooden or plastic spatula to
carefully turn the crepes over.
6 Bake the other side until it is golden
brown and remove the crepe from the
hotplate.
7 Repeat steps 1 to 6 if you wish to make
more crepes.
8 Remove the plug from the plug socket
once you have finished.