manual

6 Royal Crepe Maker Article 492227
Maintenance
and cleaning
• Never clean the appliance when it is
turned on or is still hot. Turn off the
appliance by unplugging it and wait
until it has cooled down before
cleaning it.
• Make sure no water gets into the
housing.
• Do not immerse the appliance in water
or other liquids. If this does happen,
do not use the appliance again. For
safety reasons, dispose of the
appliance.
• Never use aggressive or abrasive
cleaning products.
1 Remove the plug from the plug socket
and allow the appliance to cool down.
2 Clean the hotplate and the appliance's
housing with a damp soft cloth. Use
warm water and some washing-up
liquid to dampen the cloth.
3 Make sure the appliance is thoroughly
dry before storing it.
Safety
General information
• Read these instructions carefully and
keep them for future reference.
• Only use this appliance as described
in these instructions.
• The use of this appliance by children
or persons with a physical, sensory,
mental or motor disability or persons
who lack the necessary knowledge
and experience may result in a
dangerous situation. Persons
responsible for their safety must give
explicit instructions or supervise the
use of the appliance.
• Make sure children do not play with
the appliance.
• Repairs may only be carried out by a
qualified service technician. Never try
to repair the appliance yourself.
• Only use accessories recommended
by the supplier. The use of other
accessories may result in damage to
the appliance, thereby creating a
hazard for the user.
Heat and electricity
• Before use, verify that the mains
voltage is the same as that indicated
on the appliance’s type plate.
• Plug the appliance into an earthed
plug socket.
• Always remove the plug from the plug
socket when the appliance is not in
use.
• Always remove the plug from the plug
socket by pulling the plug, not the
power cord.
• Never pull the power cord to move the
appliance or to remove the plug from
the plug socket.
• Do not use the appliance if the power
cord or the appliance has been
damaged. To avoid any dangerous
situations, send the appliance to our
service department. A damaged power
cord may only be replaced by our
service department using the special
tools required for the repair.
• Certain parts of the appliance can
become hot. To avoid being burnt, do
not touch the hot parts of the
appliance.
• Make sure the appliance and the
power cord do not come into contact
with heat sources, such as a hot hob
or a naked flame.