Operator's Manual Printer PrintMaster 850 Series

SPECIFYING FORMS
35
printer is in the Setup mode as a reminder to use the yellow labels. The
buttons used for Setup are shown on the next page.
Control Panel Setup Buttons
Note that the menu system works on a “what you see is what you get”
basis. This means that whatever value is last displayed for an item is the
value that will be saved when Setup mode is exited.
Entering Setup
To enter Setup, open the front lid, and press the MENU button. The
ONLINE indicator will begin to flash yellow and the display will temporarily
show the following.
Entering
Setup Menus
After the above message has been shown, the display will change to the first
menu available, which is the FORMS MENU as shown below. In this case
the display will also show the first submenu, which will be the form that was
selected when Setup was pressed.
FORMS MENU
Form 0
Using the MENU Button
At this time you may select a different menu by pressing the MENU button.
Other menus available are the INTERFACE MENU, the OPTIONS