Instruction manual

Installation and Quick Setup
Selecting Epson Emulation
Enter the interface menu as previously described. Press the FUNCTION UP button to display
“Mode: n”. Then use the VALUE buttons to select “Epson”. Press SETUP again to exit the
setup mode and reset the printer. Epson emulation is now selected.
Selecting Proprinter Emulation
Enter the interface menu as previously described. Press the FUNCTION UP button to display
“Mode: n”. Then use the VALUE buttons to select “Proprinter”. Press SETUP again to exit
the setup mode and reset the printer. Proprinter emulation is now selected.
Selecting DEC LA 120-RA Emulation
Enter the interface menu as previously described. Press the FUNCTION UP button to display
“Mode: n”. Then use the VALUE buttons to select “LA-120”. Press SETUP again to exit the
setup mode and reset the printer. LA-120 emulation is now selected.
Selecting TTY Emulation
Enter the interface menu as previously described. Press the FUNCTION UP button to display
“Mode: n”. Then use the VALUE buttons to select “TTY”. Press SETUP again to exit the
setup mode and reset the printer. TTY emulation is now selected.
Selecting Printek Emulation
Enter the interface menu as previously described. Press the FUNCTION UP button to display
“Mode: n”. Then use the VALUE buttons to select “Printek”. Press SETUP again to exit the
setup mode and reset the printer. Printek emulation is now selected.
Page 2-13