Specifications

ANSI X3.64 Emulation
Printer Controls
Bell BEL
Causes the printer's bell to sound.
Control code: BEL
Hexadecimal: 07
Select Automatic Carriage Return ESC [ 20 h
Selects automatic carriage return mode. This causes the printer to automatically
perform a carriage return (CR) for each line feed (LF), vertical tab (VT), or form feed
(FF) that it receives. Overrides the "Auto CR:" value in the "Setup: INTERFACE"
menu.
Escape Sequence: ESC [ 2 0 h
Hexadecimal: 1B 5B 32 30 68
Cancel Automatic Carriage Return ESC [ 20 l
Cancels automatic carriage return mode. Overrides the "Auto CR:" value in the
"Setup: INTERFACE" menu.
Escape Sequence: ESC [ 2 0 l
Hexadecimal: 1B 5B 32 30 6C
Reset ESC c
Deletes all data on the current line and initializes the printer to the default settings for
the current form.
Restores the default horizontal tab stops. Default tab stops are set at every eighth
column, i.e. column 9, 17, 25, 33, 41, etc.
Resets top of form to the current position, so it is wise to be at top of form before
performing this reset. Issuing a form feed will guarantee this.
See the appendix on Printer Reset Conditions for more information.
Escape Sequence: ESC c
Hexadecimal: 1B 63
Page 2-13