User's Manual
Table Of Contents
- Unpacking And Installing The Printer
- Controls And Indicators
- Loading Media And Ribbon
- Printing Adjustments
- Calibrating The Printer
- Changing The Active IGP Emulation
- Configuring The Printer
- QUICK SETUP Menu
- Saving The Configuration
- Auto Save Configuration
- Selecting The Power-Up Configuration
- Loading A Saved Configuration
- Printing A Configuration
- Run A Barcode Demo Test
- Cleaning
- Repacking The Printer
- Contact Information
- For More Information
Saving The Configuration
50
Saving The Configuration
After customizing your settings, save them as a configuration:
1. Press the key to enter the QUICK SETUP menu.
2. Press ↑ or ↓
until Save Config. / 1* displays.
3. If necessary, press + or – until the desired configuration
displays.
4. Press
↵. Saving Configuration displays briefly.
NOTE: You can specify a 15-character name for your
configuration. See “Name Config (1-8)” in the
User’s
Manual
.
5. If necessary, set your newly saved configuration as the
Power-Up configuration. See “Selecting The Power-Up
Configuration” below.
Auto Save Configuration
If you make any changes to the default configuration menu items,
you will be prompted to save the changes to “Config #” when you
place the printer online. “#” equals the next available unassigned
configuration number. When prompted, press one of the following
keys:
• Enter. Saves to Config 1 or the next available Config, and
becomes the power-up config.
NOTE: If all eight Configs are assigned, you will be prompted to
select which Config to overwrite.
• Pause. Changes will be implemented but saved only
temporarily until deliberately saved as a new configuration or
until you power off the printer. All changes will be lost when you
power off the printer.
.
.
.