User's Manual

To Order Parts
17
To Order Parts
Go to the Illustrated Parts Breakdown (IPB) in the SLAP7000r Maintenance
Manual, which contains drawings of all printer assemblies. Next to each
illustration is a list of the parts shown and their part numbers. When locating
parts, note the following:
• If a part number is listed you can order that part or assembly. If a
component is part of a field kit, order the kit.
• Parts marked “Ref” (reference) are not spared or are part of another
assembly.
• Part numbers are not listed for common fasteners.
• In illustrations, magnified details are shown with locator arrows and
letters:
• Assemblies you can order as kits are shown in the following manner:
Notes And Notices
For your safety and to protect valuable equipment, always read and comply
with information highlighted under the following special headings:
WARNING A warning describes conditions that can harm you as well as damage
the equipment.
CAUTION A caution describes conditions that can damage the printer or related
equipment.
IMPORTANT Information vital to proper operation of the printer.
NOTE: Helpful and timesaving tips about printer operation and maintenance.
A
A
This arrow points to an area . . .
that is magnified here, on
the same page or a
subsequent page.
90
85
80
87
To get item 80, 85, or 87, for
example, order item 90, which
is a kit containing all these
parts.