User's Manual

Chapter 2 Setup

Figure 11. Loading Labels

9. Unwind approximately 3.0 feet (91cm) of media from the label roll. If your

label roll does not have a leader, remove the labels from the backing. The

empty backing (leader) will act as a leader to thread the media through

the SLPA components.

10. Pull the brake assembly away from the label roll back stop (behind the

label roll retainer) to release the tension.

11. Thread the leader around the rollers and toward the media damper using

the solid white arrow threading diagram etched on the front center wall

plate.

Label Roll

Retainer

Brake

Assembly

Printhead

Platen

Media Damper

Backing (Liner) Path

Label Roll