User's Manual

Printing A Configuration
85
NOTES:
Italicized items are available only when Admin User is set to Enable (in the PRINTER CONTROL menu).
1
Appears only if Port Type is set to Centronics (in the PARALLEL PORT menu).
2
Appears only if the CTHI option is installed.
3
Appears only if an network interface card (NIC) is installed.
4
Appears only if the IPDS emulation is installed and the correct security key is used.
5
Appears only if a Wireless Option is installed.
PARALLEL
PORT
(page 160)
SERIAL
PORT
(page 164)
Port Type
Baud Rate
Word Length
Stop Bits
Parity
Data Protocol
Buffer Size in K
Trickle Time
Timeout
Report Status
Data Term Ready
Request to Send
Poll Character
Poll Response
Idle Response
One Char Enquiry
Printer Status
Framing Errors
Port Type
Data Bit 8
1
PI Ignored
1
Buffer Size in K
Auto Trickle
Trickle Time
Timeout
Report Status
Switch Out On
Prime Signal
Data Polarity
1
Resp. Polarity
1
Busy on Strobe
1
Latch Data On
1
Offline Process
C/T PORT
2
(page 172)
Port Type
Device Address
Timeout
Report Status
ETHERNET
ADDRESS
3
(page 173)
IP Address SEG1:
IP Address SEG2:
IP Address SEG3:
IP Address SEG4:
Subnet Mask SEG1:
Subnet Mask SEG2:
Subnet Mask SEG3:
Subnet Mask SEG4:
Gateway Address SEG1:
Gateway Address SEG2:
Gateway Address SEG3:
Gateway Address SEG4:
MAC Address
DHCP
ETHERNET
PARAMS
3
(page 175)
Novell Protocol
Nest Serv Type
NetBIOS Protocol
Novell Frame
ASCII Data Port
IPDS Data Port
4
Keep Alive Timer
Ethernet Speed
Job Control
WLAN
ADDRESS
5
(page 178)
IP Address SEG1:
IP Address SEG2:
IP Address SEG3:
IP Address SEG4:
Subnet Mask SEG1:
Subnet Mask SEG2:
Subnet Mask SEG3:
Subnet Mask SEG4:
Gateway Address SEG1:
Gateway Address SEG2:
Gateway Address SEG3:
Gateway Address SEG4:
MAC Address
DHCP
MAIN MENUS