User's Manual

194
Chapter 3 GPIO CONTROL Menu
GPIO CONTROL Submenus
GPIO
Enables the use of the GPIO hardware.
• Disable. The default.
• Enable. Required for SLPA operation.
GPIO Tables
NOTE: This menu appears only if a user-defined table is downloaded to the
printer.
Allows you to select a mapping table.
• Internal. The default. The standard internal mapping table.
• User Defined. The user-defined mapping table. This option is required for
SLPA.
GPIO Sel. Table
NOTE: Select Table Main is required.
Table menus must be downloaded for SLPA operation.
GPIO Monitor
NOTE: This menu appears only if a user-defined table is downloaded to the
printer and selected.
Shows the status of the GPIO inputs on the LCD.
• Input OFF. The default. Disable.
• Input ON. Enable.
GPIO Print&Apply
NOTE: This menu appears only if Admin User is set to Enable (in the
PRINTER CONTROL menu).
Enables the use of print and apply hardware.
• Disable. The default.
• Enable. This option is required for SLPA.