User's Manual

282
G
Gap Length option, 129
GAP NOT DETECTED See Manual fault
message, 215
Gap Windowing option, 129
Gap, media sensing, 58, 60
Gap/Mark Sensor option, 94, 126
Gap/Mark Thresh option, 127
Gateway Addess option, 174, 179
General cleaning, 197
General operation, 19
Glob Mem Adjust option, 140
GPIO CONTROL
menu, 193
submenus, 194
Grey, printer test, 207
GRF CHK ERROR PRESS PAUSE fault
message, 215
Grid, printer test, 208
H
Half Speed Mode fault message, 215
Handling, 21
Handling, SLPA, 21
Handshaking, hardware and software, 245
Hardware handshaking, 245
Head On Time option, 159
HEAD POWER FAIL fault message, 215
Head Print Dist option, 158
Head Type option, 159
Head Voltage option, 159
Hex Dump Mode option, 158
High Volt Alert option, 192
Holes, media sensing, 60
Hor Image Shift option, 91, 113
Horizontal black marks, 59
Host Form Length option (PGL), 149
Host Interface option, 135
I
I-2/5 Selection option, 153
Idle Response option, 169
Ignore Mode option, 152
Ignore Text option, 151
IGP/PGL ERROR fault message, 215
IGP/PGL SETUP menu, 144
IGP100 Compatibl. option, 152
IMPORTANT, definition, 17
INCOMPATIBLE WITH CUTTER fault
message, 216
Indicator descriptions, 38
Indicator light
data, 39
online status, 38
Indicators, keypad, 36
Installation, 18
INSUFFICIENT RAM Reboot/Add RAM fault
message, 216
Interface panel, 30
Interface, communications specifications, 252
Interfacing, 243
Internat. Mode option, 187
IP Address option, 174, 179
IPDS Data Port option, 176
J
Jets, air, 52
Job Control option, 177
K
Keep Alive Timer option, 176
Key descriptions, 38
Keypad
control panel status, 36
functions, 36
indicators, 36
L
Label application
adjustments, 68
process, 71
Label backing, remove, 53
Label Length option, 91, 111
LABEL MISSING Check Paper Path fault
message, 216
Label on Pad Sensor, 254
Label print process, 71