User Manual


Printer Features
Standard Features
Your M4L offers the following standard features:

Standard Feature
Direct thermal printing
Black mark reflective sensor (center position , black mark in back side)
Gap transmissive sensor (Fixed, center of offset 2.75 mm to right from center) 203 Print Density
203 Print Density
Cover open sensor
Label Taken sensor
4 operation buttons (On/off, menu, info, and feed)
2 LEDs for printer status and battery status
USB 2.0 (full speed) interface
Class 2 Bluetooth 2.1 module
32 MB SDRAM memory
16 MB FLASH memory
Micro SD card reader for memory expansion up to SDHC 4G (max.)
DC 7.2V/5800 mAh Li-ion rechargeable battery
Real time clock
Powerful 32 bit 200 MHz RISC processor
Zebra® CPCL and Zebra® ZPL emulation languages support
Internal 8 alpha-numeric bitmap fonts
Internal Monotype Imaging® true type font engine with one CG Triumvirate Bold Condensed
scalable font
Fonts and bar codes can be printed in any one of the four directions (0, 90,180, 270 degree)
Downloadable fonts from PC to printer memory
Downloadable firmware upgrades





Bar code, graphics/image printing
Supported bar code Supported image
1D bar code 2D bar code
BITMAP; BMP; PCX
(Max. 256 color
graphics
Code 128 subsets A, B, C; Code 128UCC;
EAN 128; Interleave 2 of 5; Code 39; Code
93; EAN-13; EAN-8; Codabar; POSTNET;
UPC-A; UPC-E; EAN and UPC 2(5) digits;
MSI; PLESSEY; China Post, ITF-14; EAN14;
Code 11; TELPEN; PLANET, Code 49;
Deutsche Post Identcode; Deutsche Post
Leitcode; LOGMARS
CODABLOCK F
mode; DataMatrix,
Maxicode, PDF-417;
Aztec; MicroPDF417;
QR code; RSS
Barcode (GS1
Databar)