User's Manual


26
Connect the printer and computer with a USB cable.
Note: The printer connects with the computer via USB to USB cable or USB to RS-232 cable
(option).
Select the printer interface connected with bar code printer
USB to USB cable USB to RS-232 cable
The default interface setting is USB
interface. If USB interface is
connected with printer, no other
settings need to be changed in the
Interface field.
Click the “Printer Function” button to setup.
The detail functions in the Printer Function Group are listed below.
Function Description
Calibrate Sensor
Calibrate the sensor specified in the Printer Setup group media sensor
field
RTC Setup Synchronize printer Real Time Clock with PC
Factory Default Initialize the printer and restore the settings to factory default.
Reset Printer Reboot printer
Print Test Page Print a test page
Configuration
Page
Print printer configuration
Dump Text To activate the printer dump mode.
Ignore AUTO.BAS
Ignore the downloaded AUTO.BAS program. This function will cause
the printer to reboot.
Exit Line Mode
Exit line mode if the printer is in CPCL. This action allows the user to
use Configuration Utility to setup the printer.
Password Setup Set the password to protect the settings
Active Emulation Select ZPL or CPCL emulation
