User`s manual

Ethernet Submenu
237
ETHERNET PARAMS
The ETHERNET PARAMS menu helps your printer communicate
on a network.
For information on assigning the IP Address, Gateway Address,
Subnet Mask, and MAC Address, refer to the Network Interface
Card User’s Manual.
You may also enable or disable the Novell or NetBIOS Protocols
within this menu, as well as selecting which Novell Frame scheme
to use in processing Novell signals. See the Novell chapter in the
Network Interface Card User’s Manual for more details.
ETHERNET
PARAMS
(from page 99)
IP Address Subnet
Mask
Novell
Protocol
xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx hhhhhhhhhhhh Enable*
Disable
Bindery*
NDS
Auto
* = Factory Default
Novell
Frame
ASCII
Data Port
Ethernet
Speed
Auto Sensing*
Ethernet II
Ethernet 802.2
Ethernet 802.3
802.2 Snap
9100 Auto Select*
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
Gateway
Address
MAC
Address
Nest Serv
Type
DHCP
Disable*
Enable
Keep Alive
Timer
3 Minutes*
2 - 10 Minutes
NetBIOS
Protocol
Enable*
Disable
Job Control
Standard*
Enhanced
Off