User`s manual

Ethernet Submenu
241
PRINTER CONTROL
Unidirectional
The Unidirectional feature affects both print quality and printing
speed. By setting this feature, you can configure the printer to print
in both directions of the shuttle sweep (bidirectional), or to print in
one direction only (unidirectional).
• Disable. The printer will print all data in both directions of the
shuttle sweep (bidirectional printing). This choice produces
higher printing speed.
• Enable. The printer will print all data in only one direction of the
shuttle sweep (unidirectional printing). Although enabling this
feature reduces print speed, it enhances the vertical alignment
of dots and produces cleaner, sharper barcodes and text.
PRINTER
CONTROL
(from page 99)
Unidirectional
PMD
Fault
Open Platen
@BOF
Slow Paper
Slew
Power Saver
Time
Tear Bar
Dist.
2
Shuttle
Timeout
Disable*
Enable
Enable*
Disable
Disable*
Enable
Disable*
Enable
15 minutes*
(5 sec.-60 min.)
Disable
Instant
5.12 inches.*
(4.5 - 10.5)
5 Seconds*
(1-60 seconds)
* = Factory Default
1
= P5000 Models only
2
= P5220 Model only
Bar Code
Quality
Draft*
Dark
Recommended
Print Line
Select
1
Bar Code Detect*
Graphics Detect
Dual
Single
Upper*
Lower
Diagnostics
Pwr Save
Control
Enable*
Disable