Specifications

Fault Messages
199
DOWNLOADER ERROR
FLASH WRITE #3
Repeat Download
No A Flash Write to
Expanded Flash failed
to complete.
Try downloading again or
contact your authorized
service representative.
DOWNLOADER ERROR
FLASH WRITE #4
Repeat Download
No A Flash Write failed to
Expanded complete.
Try downloading again or
contact your authorized
service representative.
DOWNLOADER ERROR
FLASH: W ADDR BAD
Repeat Download
No An attempt was made
to write to FLASH
where no FLASH
exists.
Try downloading again or
contact your authorized
service representative.
DOWNLOADER ERROR
MAIN FLASH FULL
File Too Big
Yes An attempt was made
to download to a full
main Flash memory.
Delete and optimize files.
DOWNLOADER ERROR
NO EMC DETECTED
Repeat Download
No The printer does not
contain an EMC and
the firmware attempted
to access the EMC.
Install EMC or contact your
authorized service
representative.
E00 EXE @ ADDR0
See User Manual
Yes An illegal or
unsupported instruction
was attempted in the
application program.
1. Cycle Power. Run the
print job again. If the
message appears, load
the latest emulation
software.
2. Cycle power. Run the
print job again. If the
message appears,
record the display
message and send it to
your next higher support
facility.
Table 15. Fault Messages
Displayed Message
Can User
Correct?
Explanation Solution