Specifications

EMULATION Submenus

Auto Uppercase

This parameter enables the printer to print text in all uppercase when using

the ALPHA command.

• Disable (factory default). The printer will print text in upper and

lowercase.

• Enable. The printer will print text in uppercase only.

Slash 0

This parameter allows you to print the numeral “0” with or without the slash.

This option applies to all character sets except OCR A and OCR B.

• Disable (factory default). Zero is printed without a slash.

• Enable. Zero is printed with a slash.

Select SFCC

You can specify which decimal code (1-255) will be used as the Special

Function Control Code (SFCC). The SFCC denotes that the following data is

a PGL command.

The range is 1-255, and the factory default is 126.

Host Form Length

Determines how the physical label length (see Label Length under the MEDIA

SETUP menu) is affected upon receiving an EXECUTE command.

• Enable (factory default). The physical label length will change to match

the form length (specified in CREATE command). The physical label size

remains at the new setting until another EXECUTE command is received,

or the PRINTER SETUP menu settings are changed.

• Var. Length. The physical label length is the longest print element

defined in CREATE mode, including both static and dynamic elements,

plus the setting of “Var Form Adjust” with CREATE;NAME;0.

• Var Dynamic Len. The physical label length will change to the longest

print element defined in the form, including the dynamic element in

EXECUTE mode and the static element in CREATE mode, plus the

setting of “Var Form Adjust” with CREATE;NAME;0.

• Disable. Forms printed in EXECUTE mode do not change the physical

label size. Therefore, the size of the form (defined in CREATE mode)

must fit within the current label dimensions, or errors may occur.

NOTE: The difference between Var. Length and Var Dynamic Len is for

example, CREATE;NAME;0. If there are 10 dynamic fields defined in

CREATE mode, but only three dynamic fields are used in EXECUTE

mode (for Var. Length), the label length will be based on the longest

printed element among the 10 dynamic field and the static element

defined in CREATE mode. For Var Dynamic Len, the label length will

be based on the longest printed element among the three fields

defined in EXECUTE mode and the Static element defined in

CREATE mode.