Smart Watch User Guide Note: Please charge the smart watch before use. FCC ID:2AQAX-H5 Working condition requirement for mobile phone iOS 10.0 & above Android 4.4 & above Bluetooth 4.
Download and pair the App 1. Download the [CoBand] from the App Store or Google play store, or scan the QR code below to download it. 2. Device Activate & Charge Make sure power is working normally before initial use. In case device is under low battery, connect the device to the charger. Device will automatically boot up (please connect the USB in normal DC port (5V-500mA) for charging as below. The host should be separated from the strap when charging). 3.
Smart watch features Key Definitions: Tap: function switch Long Press: activity & mode switch Time Mode Switch to the watch dial style by long press of the button. Step mode The smart watch automatically records the number of steps, the calories you burned and the distance you walked. The motion data is synchronized with the App. Heart rate monitor Get into the Heart Rate Page and automatically start measuring your heart rate.
Blood pressure monitor Get into the blood pressure Page and automatically start measuring your blood pressure. (Only for watches with blood pressure function) Sleeping monitor By wearing the smart watch while sleeping, it will measure your sleep time and quality. The measured data is synchronized with the App. Message reminder It Can display notification content from Twitter, Facebook, WhatsApp, Instagram, Line, etc. Latest 10 messages can be stored on the watch.
More interface Long press to enter into the following functions. Power Off Reset Stopwatch Brightness About Notification Mode If there is a call or message come, the device will force into call/message alert mode no matter what other mode you are in, after quit, it returns to previous mode. Incoming call Message Alarm Sedentary Charge FAQ The smart watch Can't pair with the phone bluetooth? Make sure the phone's Bluetooth and GPS are on. And make sure the device is not in a low battery state.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.