Specifications

2.66

Applications Manual

Revision 1.11Prism Sound dScope Series III

Specification

For the first test, all the main channel signals should have very similar frequency response curves,

rolling off at lower frequencies. The Sub signal redirected from the front speakers should be distinct

and around 10dB higher than the other channels at low frequencies. If Simplified Bass Management is

used, the Left and Right outputs will show a flat response and no bass will be redirected to the Sub.

For the second test, the Left and Right frequency responses should be flat. If Simplified Bass

Management is used, there will be no signal from the Sub present at the Left and Right outputs.

5.2.1.7 THD vs Frequency

dScope Configuration:

THD vs Frequency Track 43-47.dsc

Track Number:

43-47

Corresponding AP Test File:

5_thdfreq

Duration:

60 sec (each track)

Test Signal Description:

-20dBFS sweep, 20Hz to 20kHz

Channels:

L (track 43), C (track 44), R (track 45), Ls (track 46),

Rs (track 47)