Specifications

IMD 20, 49, 80
Input characteristics 10
Input D/A Line-up 8
Input for full-scale amplitude 12
Input logarithmic-gain stability 13
Input-to-output leakage 25
Inter-channel cross-talk and separation 24
Inter-channel Phase 43
Inter-channel phase response 19
Intermodulation distortion 20
- J -
Jitter 46, 49, 80
Jitter Spectrum 46
Jitter susceptibility 13, 26
Analogue-to-digital 14
Digital-to-analogue 14
Digital-to-digital 15
- L -
Leakage 25
Level Search Routines 9
Level Trim Controls 76
Level-dependent logarithmic gain 20
Linear PCM 48
Linear response 17
Low Frequency Overload 73
Low-level noise modulation 21
- M -
Manual 5
Maximum input amplitude 12
Maximum output amplitude 16
Maximum Output Level 33, 59
Maximum signal level vs frequency 18
Menu 7
Structure 7
- N -
Noise 42, 69
Noise in the presence of signal 23
Noise modulation 21
Noise Sequencer 56
Non-audio bit 48
Non-linear inter-channel cross-talk 25
- O -
Out-of-band spurious components 15
Output amplitude at full-scale 16
Output characteristics 15
Output D/A Line-up 8
Output-level stability 17
Overload behaviour 11
- P -
Peak jitter 46
Phase 43
Phase response 19
Interchannel 19
Phase vs frequency 18
Polarity 19, 74
Power-line (mains) related products 24
- R -
Reference Level 29, 32, 53, 57
Relative Output Level 58
Relative Phase 74
Results 29, 53
Collecting in a document 29, 53
Rollover 11
Running the tests 29, 53
- S -
S/PDIF 49, 80
Separation 24, 38
Set-top-box 31, 56
Signal modulation noise 21
Signal-to-noise 22, 42, 69
Signal-to-noise ratio 23
SMPTE/DIN IMD test 20
Spurious components 15
Standard high-pass filter 26
Standard low-pass filter 26
Standard notch filter 26
Standard weighting filter 26
Suppression of alias components 11
Suppression of imaging components 16
Surround Channel Delay 78
Dolby Digital 78
Susceptibility to RF interference 11