Specifications

Prism Media Products Limited AD-2 Dual-rate A/D converter
Operation Manual
Issue 0.2 © Prism Media Products Limited
11 August 1998 Page 13 of 58
2.8. Introduction to the Setup Wizard
The Setup Wizard helps you create custom A-D configurations. It provides choices of
sample rate, wordlength, synchronization, maximum input level and digital interface
format.
The Setup Wizard will allocate Main Output to all output connectors.
To use the Setup Wizard, press the <Setup Wizard> button on the far right of the AD-2
front panel and follow the prompts in the LCD display. The first prompt will be:
* Setup Wizard *
Enter to start.
Press [Enter], and the following will be displayed:
To configure a
basic A-D mode..
Press [Enter] to continue, then you will see:
Use Internal
Ref Sync?
At this point, you may confirm the internal sync selection or change it using the [77] and
[66] (Edit/Change) keys. Repeated use of either key will cycle through the list of
alternative selections.
When the desired selection is displayed, confirm it using the [Enter]/Accept key.
Continue with the process of selecting settings until you see:
Setup Wizard is
now finished...
Press [Enter] and you will see:
You can save
this setup...
Press [Enter] and you will see:
Empty stores ->
are flashing...